Skip to content

Hype Performance Group – Airbus H145 Base Pack v2.0.0 (Build 406)

Info
Note: See this post for the Airbus H145 Action Pack.

Note: You can download the Hype Operations Center here. Certain features might not work however due to requiring a license key.

Changelog
– v2.0.0, Build 406:
– Fix a performance issue (introduced 404)
– Fix North Sea detection to work with marketplace and non-marketplace install
– Adjust scrolling in the mission app to not overlap the text
– Fix an error with DMS location display on the mission briefing or dispatch

– Build 405:
– Improve avionics general performance
– Add a bearing command to get a true heading between any two locations
– Add a tofixed command to round numbers to a specific number of digits
– Add create_object.is_static_object which enables using objects 20-75 and reserving the low numbers for moving objects
– Add a Help&Docs app to the tablet, which can simply launch the documentation website
– Add a My Tablet app which controls various tablet settings (moved from Aircraft->Options page)
– Add an option to hide the large tablet clock
– Add links to open GTN750 vendor websites from the tablet (PMS50 and TDSSim)
– Fix a bug where some POIs weren’t using DMS format to display coordinates
– Fix a bug where the degree symbol wasn’t being rendered on the tablet mission map POI popup

– Build 404:
– Better handling of collective mode engagement in hover (low and high weights)
– Fix flipped steering arrows on the tablet light panel
– Add H:Events for engine failures, fires, mast moment
– GTC internally uses knots now (previously the unit was feet per second: L:H145_SDK_AFCS_GTC_X and L:H145_SDK_AFCS_GTC_Z)
– Suppress rotor rpm warnings while no engine is in FLIGHT
– GTC fixes (coordinated flight at high speed)
– Fix a bug which could cause bugs to be set incorrectly (IAS at zero)
– Fix a bug where IAS was limited to 110kt on AP/UM ON x2 engagement
– Fix a bug allowing the HISL and SL without electrical power
– SEMA Freezing logic change during GTC.H

– Build 403:
– Fixes for rolling quickly in cruise and wobbling while tracking NAV deviation
– Improved handling for HDG mode at low speed
– Avoid pitch-up when engaging GTC.H at high speeds
– Add H:Events and bindings for Hype Radio app
– Fix CR.HT mode bug was hidden when in FLYUP mode
– Fix collective beep trim up/down not working when in FLYUP mode
– Fix an issue where H:Events were flooding when AFCS was off (this would impact H:Event catching tools)
– Fix steep turns not triggering enough bladeslap sound

– Build 402:
– Fix ALT nosedive bug from 401

– Build 401:
– AFCS: CSAS (hands on) mode: SEMA will re-center slowly when in hover domain, but freeze in cruise domain
– AFCS: Fixes for wobbling at high speeds
– AFCS: Fix for collective modes descending from hover after engagement
– Prevent takeoff when engines are set to IDLE
– Fix CH.RT mode not taking a pre-selection
– Fix airspeed bindings (enabling Select Airspeed Bug)
– Aerosoft North Sea missions now have their dependency scenery listed
– Fix a bug preventing the “Scenery Missing” dialog from not properly opening the URL
– Fix open_url not properly opening the URL.
– TDS GTNXi Unit 2 is now toggled to default on every startup
– Fix IBF CLOG TREND when not installed

– Build 400:
– Mission map lat/lon is now DMS format
– Add bindings for WING LIGHTS OFF/WING LIGHTS ON for S/L.
– Add bindings for HELICOPTER THROTTLE axis (not recommended)
– Fix VNE sound calculations referencing ground speed
– Bladeslap sound is back in steep turns
– Various adjustments to sound timings
– Fix display of mission briefing text color/alignment
– Fix a case where incorrect modal dialog text could be displayed.
– Improve flight at 130kts
– Fix for ground objects sliding around
– Add track_object and set_map.update.point.location to show moving icons on the mission map
– Approach flight plan is now displayed properly on NAVD/DMAP/MissionApp
– Fix various issues with NAV mode disconnecting when transitioning flight plan legs
– Add Gameplay Mode back (which now controls whether you can over-torque via collective)
– Fixes for electrical circuit handling for TDS GTNXi integration
– Fixes for replay mode
– Fix a bug with CRS push on a VOR not being TO the station

– Build 399:
– Add more mission briefing widgets: buttons, text with params, links with commands, remote frame, icon legend, scroll command
– Add a dispatch briefing in addition to the mission briefing
– Add L:MISSION_TIME and :TIME message format operator
– set_user_poi set_briefing_dialog set_dispatch_dialog scroll_to_briefing_item scroll_to_dispatch_item set_dispatch
– deprecate set_ui command (no known use)
– Add engine fuel valve positions to VMS CTRL page

– Build 398:
– Fixes for multiplayer activities
– Fixes for mission briefing
– Enable Auckland Earthquake multiplayer activity

– Build 397:
– Add mission briefing section to Missions app
– Remove old missions
– Fix mission object placement when at locations below sea level
– Fix an issue with bearing2 using an outdated heading
– Fix extra sounds from mission objects

– Build 396:
– Adjust default camera view again
– Add Open Location on PC back to the tablet mission app for any POI (configure the launch URL in MissionSystem.json .. default is Google Maps)
– Bindings – additional info for Ops Center 32+
– Offshore rescue (start from Library only) will now use the coastline database (no need to worry about facing water anymore)
– Remove Water Rescue Here (since it shows up on land too – use the Library mission now)
– POIs may now have up to 10 missions listed
– Add basic HEMS MedEvac missions for Aerosoft North Sea POIs (platform, ship, substation) .. start from POI or Library
– Clicking POIs on the missions map is now easier at all zoom levels

– Build 395:
– Enforce Cyclic SAS speed limits (values greater than 120 are exempt)
– Backup SAS uses only one SEMA for stabilization
– Fix IBF simulation not accumulating
– Fix ULT FADEC mode
– Add RESET RUDDER TRIM binding
– Fix a bug with bearing2 not being calculated relative to the target object heading
– Add default LANDING LIGHT STEERING bindings
– Add legacy mixture bindings for S/L steering to ops center list
– Change ICAO type to EC45 for better multiplayer watching. Thanks @WombiiO

– Build 394:
– Fix rotor startup/shutdown time
– Fix clipped cockpit cameras and adjusted default view
– Remove AP_NAV1_HOLD_OFF hotkey as it was conflicting
– Beep trim restored for Backup SAS mode
– Rename Collective Beep Release to Beep Trim
– Fix BOT1+2 USED fire test message
– Add Trim Release (TR) icon to tablet status bar
– Fix tablet restore settings default button
– Tablet GPU will now show gray/red when unavailable
– Update tablet default wallpaper

– Build 393:
– Fix the turn coordinator brick
– Implement N2 shaft simulation
– Improve engine sound sync and rotor startup/shutdown time
– Added AUTOPILOT ON and AUTOPILOT OFF bindings for AP/BKUP ON and AP/UM OFF
– Added AUTOPILOT DISENGAGE TOGGLE for AP/BKUP CUT
– Added AUTOPILOT NAV1 HOLD bindings
– Added RADIO ALTITUDE bindings for CR.HT
– Added CONDITION LEVER bindings for engine controls

– Build 392:
– AFCS OFF – Enable classic beep trim (center position changing) … Trim Release (rotor trim reset) will zero trim
– IMPORTANT: A.TRIM OFF – Now implemented as a degraded sub-mode of ATT, with trim release. (NOTE: Use the latching Trim Release bindings now!)
– VMS-CTRL page now shows cyclic trim release and spring status, and yaw SEMA dot
– Add a new setting for users with no friction lock or those that prefer the Asobo autopilot control-blocking style
– Remove extra load stations in some variants
– AFCS: ATT mode collective beep trim left/right will now trim the yaw position (and can be used to recover from GTC.H position)
– FADEC will now attempt to maintain TRQ/N1/TOT limits and NR will droop
– Fix tablet Sim Time being off by 1hr compared to MFD.

– Build 391:
– Increase flight model stability in cruise
– Add default autopilot bindings: IAS, ALT, HDG, VS
– Add a cache facility for common OSM queries
– C&D command now turns off standby battery and avionics master
– Fix a bug with is_ground_object
– Add point_object, location_alter, and add360 commands
– NOTE: The reference datum changed, your camera and custom FX positions must be adjusted by +4 longitudinally to retain the same position

– Build 390:
– Flight Model: AFCS-OFF flight model is now substantially less stable
– Flight Model: Rotor Underspeed/Overspeed is back
– Flight Model: Autorotation is back (difficult)
– Tweak speed trims for smoother flight in all conditions
– Add a Collective Step Size setting for keyboard/button users
– Add a Center-Displace Reset Time setting to determine how long to wait after H145_SDK_CYCLIC_FORCE_TRIM_DISPLACE_CENTER
– Fix IAS bug not hiding when inapplicable but off-scale
– Passenger Transport mission will work directly from the library (random pick-up location in 50km)
– Fix various bugs around cargo couple/decouple
– Fix a bug that allowed GA mode to activate while on the ground

– Build 389:
– 389: Fix pitch attitude bug from 388
– 389: Fix OAT text clipping
– 389: Fix mission index not regenerated from 388
– 389: Fix DB:CITY from 388

– Build 388:
– Update FLI calculations
– Update MSFS POI database for WU12 NZ
– Add a mission API query_country to determine precise country presense (including None for means ocean).
– Add DB:OVERWATER_COASTLINE, a database for positioning offshore scenarios
– Add DB:CITY worldwide city locations database
– Add a Nearby Fire (Wooded area) mission. This creates a small fire in a wood/grass area and should work worldwide.
– Add a prop for brown water (flooded area – for various rescue)
– Rotor blade weights (balls) are visible at high rpm
– Take the fix available in SU12 Beta 1.31.19.0 … Remove Sim Version switch
– Fixes for collective SAS (30kt bump, jitter)
– Add the query_data API to use multiplle location results
– Add HEMS Rescue – Fuel Station Fire mission
– Fix tablet Time source setting not working

– Build 387:
– FLI results no longer impacted by SAS slider
– Update FLI calculations
– Multiplayer mission platform
– Add teleport_to command to mission system
– Fix a bug preventing placing cargo onto elevated platforms
– Add create_location.no_results_commands to the mission system
– Add Sim Version option to Tablet Aircraft Options for SU11/SU12 (necessarily for another few days)
– SU12 Beta users: Select Sim Version to SU12 on the tablet Aircraft Options page

– Build 386:
– HEMS: Add a mission where a plane has crashed or emergency landed at an airport, and you take a pateint to the hospital
– Gauratnee stability irrespective of controller input stream rate
– Increase the key/button rate of collective change
– Fix broken style for tablet Hype Online app
– Mouse hover states for tablet Action Center widgets
– Add a runway position database (DB:RUNWAY)
– Route line and POIs will render on top of HTAWS and WX overlay (DMAP and NAVD)

– Build 385:
– SAS Stability Level is now per-control (cyclic, yaw, collective)
– Hide Xbox controller and FBW Tail rotor settings, neither are working well right now
– Adjustments to speed trim to avoid pitch axis saturation around 60kt
– Add Military airport database
– Fix missions being activated from the library sending the user to the World Origin
– Add DB:APRON database (suitable airport locations)
– HEMS: Add an Airport-To-Hospital transfer mission

– Build 384:
– Fix a bug which breaks selecting no-location POI on the map
– Add sling cargo anywhere mission (move 4 objects from A to B)
– Add a toggle for the latching Trim Release bindings
– Reduce heat blur effect

– Build 383:
– Adjust flight model and engines
– Add Fenestron safety light (REGA-style)
– Mission entry can now be attached to the Custom Location POI (anywhere)
– SAS is always 0 on all axis when autopilot is flying, regardless of user SAS which will be used when HANDS ON
– Return DCS-style force trim with H:H145_SDK_CYCLIC_FORCE_TRIM_DISPLACE_CENTER
– New Firefighter Mission: Fire Anywhere (click on the map and then select Start Fire Here)
– Fix mixed up cargo items once the object transitions to/from the ground
– Add ‘Water Rescue Here’ mission to Offshore (click any location over water)

– Build 382:
– Increase FLI travel from 0 to 10
– Reduce stability on the AFCS OFF flight model
– Fix civil_fly_to_destination and HEMS_fly_to_hospital macro not cleaning up flare
– Cruise speed is increased
– Remove skew from pitch attitude indicators
– Revert recent Set-Cyclic-Center changes to previous version

– Build 381:
– Fix a bug causing mission system stop when selecting POI (set_route [])
– Fix a bug causing mission system to stop if objects weren’t deleted before the end of the prior mission
– Start missions by selecting the POI and then the mission by name (or selecting from the library)
– selected POIs all show lat/lon
– Mission Entry Points layer added
– Mission start_info may now have an array for query
– set_route will now clear the flight plan
– Show all missions in mission library (note that this will require more work to fix up all the cases so you can start either way)
– Passenger Transport mission will now have an inbound leg if selected from far away
– Hospital Patient Transport will now have an inbound leg if selected from far away
– Add L:DEBUG_SET_CYCLIC_CENTER_FREEZE_TIME to configure the set-cyclic-center freeze time
– More precise position reporting (breadcrumb) on Hype Live Map

– Build 380:
– Mission set_route command now sets the MSFS/GTN750 flight plan
– Set-Cyclic-Center re-purposed to work with a pause between changing controls
– DMAP and NAVD route line scale/offset issues fixed
– Change to a more readable font for the MFDs
– CTRS (Contrast) (Overlay) is working again (Weather overlay, Terrain overlay)
– BRT (Brightness) (Underlay) is working again (NAVD and DMAP map underlay, SVS underlay)
– Fix FLI guidance arrows showing when on the ground at idle

– Build 379:
– Fix a bug with precision of the resulting lat/lon from clicking on the mission map (thanks Thoradan)
– Fix a bug making it hard to select from a close group of items on the mission map
– Civil/Lux transport mission (not templates) changed to DB query / map location selection
– Civil/Lux transprt mission may now go to helipads and airports (start location is civil helipad only)
– Move Flight Controls page to R1 select key
– Add MSFS POI layer and database
– Initial support for manual install
– Add L:H145_SDK_BUILD for the current build number
– Add TOGGLE H:Events events for DB map soruces, and add to H145_Keys this time
– Add H:Events for mission app followme on/off and orientation NorthUp/HeadingUp states

– Build 378:
– HEMS Hospital selection is now based on the map with higher quality data and no data query
– HEMS Hospital missions may now be of infinite distance as any hospital may be selected
– Crew will now report the cabin is secure for HEMS missions (audio message)
– Add H:Events for toggling mission map database layers on and off
– Mission App can now select a custom location or POI and get lat/lon for mission system ($MISSION_SELECTED_POI_LOCATION, L:MISSION_SELECTED_POI_TYPE)
– New Mission Command: clear_user_poi
– New Mission Command: copy_location:LOCATIONREF to:newLocationName
– Mission Command create_user_action now has show_commands
– Offline data query for built-in database layers

– Build 377:
– New interior engine/rotor background sounds
– Axis out of trim indictors added to PITCH and ROLL axis
– SPEED TRIM: OFF setting will now avoid the deadzone and ALWAYS use the user stick as trim
– Replace Speed Trim and FBW Cyclic with Cyclic Control: NO-SPRING | CENTERING-SPRING | XBOX
– ATT deviation display when attitude deviates more than 3.5 degrees from setpoint
– GTC deviation display when ground velocity is more than 3kt difference on X or Z axis
– Add Collective and Yaw real-position cursors to Flight Controls page
– Adjust SEMA authority and travel
– Pause SEMA instaed of returning to neutral position (trim release / override)
– Adjust IAS mode
– Smooth IAS trend arrow
– Fix IBF Normal H:Events
– Remove more legacy trim logic
– Boost HISL brightness again

– Build 376:
– New interior engine/rotor background sounds
– Axis out of trim indictors added to PITCH and ROLL axis
– SPEED TRIM: OFF setting will now avoid the deadzone and ALWAYS use the user stick as trim
– Replace Speed Trim and FBW Cyclic with Cyclic Control: NO-SPRING | CENTERING-SPRING | XBOX
– ATT deviation display when attitude deviates more than 3.5 degrees from setpoint
– GTC deviation display when ground velocity is more than 3kt difference on X or Z axis
– Add Collective and Yaw real-position cursors to Flight Controls page
– Adjust SEMA authority and travel
– Pause SEMA instaed of returning to neutral position (trim release / override)
– Adjust IAS mode
– Smooth IAS trend arrow
– Fix IBF Normal H:Events
– Remove more legacy trim logic
– Boost HISL brightness again

– Build 375:
– Implement 4-axis SAS (pitch/roll/yaw and collective) when any SAS is available
– Fix HTAWS MUTE-5-MIN binding not working
– Fix STARTER (again) stuck at 64% N1
– Add cyclic center position to flight controls page (blue dot)
– Add real cyclic position to flight controls page (yellow dot)
– Add SAS positions to flight controls page (red dot)

– Build 374:
– Move Flight Controls page to VMS -> SYST -> CTRL
– Fix FND clock button
– Round VMS TRQ values to nearest 0.5%
– Fix engine STARTER not disengaging until main switches placed to FLIGHT (EDIT: Only fixed in lux variant, will fix properly next time – sorry)
– Uninstalling HTAWS will now stop the system
– Fix engine sound playing after shutdown
– Fix external bladeslap sound not working
– Fix misaligned tablet aircraft app pages
– Fix misaligned modal dialog in Missions/Maps app
– Add HTAWS mute-for-5min event H145_SDK_OH_AUDIO_HTAWS_MUTE_5_MIN
– Fix toggling HEMS patient on tablet crew page
– Add a switch for speed trim (note that this will negatively impact the AFCS right now)

– Build 373:
– Fixes for engine startup and shutdown time / sound synchronization
– Flight model improvements generally
– Implement HTAWS HAT overlay
– Fix Electrical load too high
– HTAWS prediction tweaks
– Hide incorrect DA bugs from IESI
– Add MISSION ITEMS to DMAP LAYER menu
– Fix inverted slip/skid indicator
– Revamp tablet Missions app
– Add satellite view to Tablet map views
– Add NorthUp and HeadingUp orientation to Missions app
– deprecate Maps app
– deprecate Mission Entry Markers
– Add POIs (helipad, hospital, airport) to Missions app
– Add POIs (helipad, hospital, airport) to DMAP page
– Fix an issue with DF bearing direction not taking into account the difference between true and magnetic track
– AFCS fixes for speed around 30-50kt
– Add Flight Controls debug page (EFB button)

– Build 372:
– Dark mode map is back (DMAP, NAVD, Tablet Maps, Tablet Missions)
– MFDs are always touch-interactive now
– HTAWS is now aware of vertical trajectory
– HTAWS fixes for alerting and detection (over water, repeating)
– HTAWS obstacle alerting graphics, sounds and detection – database: FAA (North America), OpenAIP (Worldwide)
– Add DisplaySetup.json, to configure display defaults as needed

– Build 371:
– Implement Forward-Looking Terrain Awawreness
– Add HTAWS Caution Terrain / Warning Terrain sounds
– Add missing HTAWS graphics, messages
– Stop sampling RA digital value

– Build 370:
– Adjust deviation graphics
– GTC.H heading and distance deviation logic
– Fix a bug with Both follow-up trim mode
– HTAWS startup system test logic
– Fix slip/skid indicator
– Add missing Decision Altitude graphics
– Fix an issue rendering negative altitudes on FND
– Add LAYER (AIRPORTS/AIRSPACE/NAVAIDS) and MAP (VECTOR/TOPOGRAPH) menus to DMAP page
– Add MAP control (NONE/VECTOR/TOPOGRAPH) to NAVD page

– Build 369:
– Fix extra yaw input in cruise (368)

– Build 368:
– Follow-Up Trim is back (new default: Both) new setting: Off
– Add Tail Rotor FBW option (for those looking for ease, please prefer the MSFS Tail Rotor Assist and do not combine them)
– Add an MFD Touchscreen setting (for external pop-out use)
– Add AFCS mode deviation triangles (IAS, HDG, ALT, CR.HT)
– Tweak how AFCS does yaw control (should avoid crazy spinning conditions)

– Build 367:
– Add a setting for ATT yaw hold and disable it by default
– Rename Cyclic Assist to Cyclic Control: Direct or Fly-By-Wire

– Build 366:
– Add Cyclic Assistance setting (possible replacement for Classic flight model modes)
– Fix pink seatbelts issue
– IAS mode tuning
– Fix IESI not aligning after power on
– ATT YAW hold is back (using pedal detection)

– Build 365:
– Fix GEN Disconnected when engine not operative
– Fix PRIME LVars
– Fix panel lights not responding to events
– Fix fuel pressure from center tank
– Update fuel messages, add MAIN TANK LOW
– Initial work for Free DG mode
– Fix bus ties not opening at shutdown
– Add load stations and basic weights back per-variant
– Fix VMS WEIGHT page payload entry limit
– Fix Cyclic visual jitter (add L:Vars representing the user+trim cyclic position without SEMA)
– Fix prime pump sound

– Build 364:
– Fix GTN circuit logic
– Fix Prime pump events
– Fix Tablet rotor brake
– Add Tablet soft-home button option
– Third party foundation work
– Tablet screen is now blank when popped out and stowed. Tablet will also turn on when clicking the blank screen.
– Fix Military variant sensor pod monitor

– Build 364:
– Increase HISL Brightness
– Remove Rotor debug app
– Fix cyclic animation stuck fwd/aft
– Fix broken cockpit bounce lights (thanks @kdfw! x2)
– Add key binding AILERON_CENTER for keyboard cyclic or other button input. Fix left/right only going one direction. (Keyboarding may still need work)
– Fix for ‘waiting for startup’ activation issue
– Fix slow human animations in fire/civcargo/offshore action pack variants
– Disable MGB Chip and reduce damage scalars
– Implement electrical system foundation
– Engines may now start without prime pumps (no change to procedures)
– Fuel consumption fixes
– Add various HOIST messages to message list

– Build 362:
– Fix issue with Engine 2 FADEC stuck at 50% N1
– 361.o1 flight model
– Rotor shutdown timing
– Fix various trim and ATRIM issues
– Adjust lateral trim / pitch speed trim (both always enabled right now)
– Fix AP Cyclic deadzone
– Fix inverted APCP H:Events
– Heat blur is back

– Build 361:
– Fix IAS knob
– Some GA mode fixes (bug is stuck at 0 sorry)

– Build 360:
– Fix nose-down in cruise tendency from 359

– Build 359:
– Faster Startup
– More inertia
– Less control forces
– More stable collective
– More TR power
– Set-Cyclic-Center is fixed (again)
– HMD is fixed

– Build 358:
– Flight model adjustments (stabilizer)
– Fix a bug with collective power with AP on vs. off
– Fix shaking on the ground (skid points)
– Set-Cyclic-Center binding is fixed
– Fix MFD SoftKey H:Events
– Add L:H145_SDK_AFCS_IAS_BUG (replaces for now AUTOPILOT AIRSPEED HOLD VAR)
– Spring forces are disabled when ATRIM system is off
– Remove classic Setup settings (use Tail Rotor assist if you preferred no torque)
– ConfigTool is deprecated

– Build 357:
– Custom Key Bindings work (ops center only – do not use ConfigTool)
– Trim release fixes
– Flight model tweaks
– Rotor brake force increased
– Tail Rotor assist is functional again

– Build 356:
– Various flight model changes
– Fix rotor overspeed
– Fix NAV cross-track
– Fix rotor brake

– Build 355:
– Implement trims in AFCS on and off modes (new helicopter bindings)
– Fixes for high speed cruise
– Fixes for NAV and HDG
– Bambi bucket and cargo hook have dynamic weight

– Build 354:
– Do not use flight model config switch!
– More CFD changes – new controls should work in addition to the old controls (collective/throttle, tail rotor/rudder, cyclic/yoke) … beep trim bindings not changed.
– Fix IAS bug (it won’t engage at 0 and will engage at the current speed on engagement if not pre-selected)
– Activation fix – waiting for startup shouldn’t appear now.
– Improved general performance

– Build 353:
– Do not use flight model config switch!
– More CFD changes – reset flight model
– AFCS v2
– Fix tail rotor torque, engine torque

– Build 352:
– CFD Preview only – no Classic flight model at all, flight model switch not included
– CFD flight model is much more stable
– CFD flight model works with native MSFS SU11 Helicopter Assists (and is quite nice)
– missions working with CFD flight model
– cruise torque/aerodynamics enable HDG mode to work again
– TOT following N1 properly now using previous logic
– Tail Rotor torque and response adjusted

– Build 351:
– CFD flight model changes
– CFD MTOW (max takeoff weight is now usable again)
– CFD FADEC (FLIGHT/IDLE is working again)
– CFD N2 is correct now – load sharing is binary, dual engine N2 is inop right now, you will see both engines show the N2 of the top engine
– CFD skids, weight stations (all variants are lux) and surface positions adjusted

– Build 350:
– More CFD fixes since 349 is not flying properly due to engine logic
– CFD engine fixes
– IAS beep trim fixed
– flight model switch is properly set to classic by default now

– Build 349:
– Flight Model switch in Hype Operations Center (switch between Classic/HPG and Next/Asobo flight models, do so only when the sim isn’t running!)
– Start from SU11 helipads (both flight models)
– XFER pumps fixed
– IAS increment fixed
– Fix bladeslap sound not being adjustable
– add has_object to mission script
– fix BARO not working

– Build 348:
– More cyclic agility – all flight model
– Fix pedals not moving in the cockpit
– Tweak collective power a bit

– Build 347:
– Restore weight to values close to accurate
– Fix MFD problems (SVS, BARO, etc)

– Build 346:
– Fix action pack activation failure

– Build 344:
– Hype Online app is added to manage preferences (default is broadcast position only)
– Hype Online setting persists properly now
– Flight Plan, Callsign, speed, rotor rpm can now be sent to the live map

– Build 343:
– Lower latency Hype Live Map

– Build 341:
– Ops Center is now an installer/manager for HPG addons
– Ops Center now displays the contents of the mission index
– Hype Live Map is now available (on by default, a persisted setting on the tablet Options page to turn it off) – live players: https://davux.com/live
– Fix Philippines livery spawning a helicopter instead of crew.
– Add Portugal Windfloat missions (same as FR Windfloat)

Description
Hype Performance Group is proud to present one of the most immersive civilian helicopter simulations ever developed. This helicopter is the perfect aircraft to tour the full world scenery in Microsoft Flight Simulator or to execute your missions with precision. You can hand fly or employ the unique auto-flight control system features to spend more time focusing on the job (or sightseeing!) and less time on managing the aircraft. This product is an artistic rendition of the real H145, developed from the flight manuals and pilot feedback.
Background

Designed to deliver excellent performance throughout the flight envelope, The H145 is the latest member of its 4-ton-class twin-engine rotorcraft product range – with designed-in mission capability and flexibility, especially in high and hot operating conditions. Compact in size, this helicopter’s small footprint and large, flexible cabin make it the aircraft of choice for a variety of civil or military missions. The best-selling H145 family (BK117, EC145 and H145) has more than 1,350 helicopters in service around the world and has clocked more than 5.5 million flight hours.

Highly Detailed 3D Model, Textures and Animations:

• Three (3) model variants (Civilian, Luxury, Military) included in the bundle
• Extremely detailed professionally modeled interior and exterior, all PBR textures
• Cockpit is almost completely interactive, supporting both the Lock and Legacy Cockpit Interaction System
• VR Cockpit Zoom supported, aircraft designed from the ground up around VR
• Rotor animations including blade droop, blade flap
• Working doors, animated windshield wipers, all flight controls animated
• Rotor downwash effects (water, snow, dirt/sand), engine heat blur and heat emissive effects
• Functional emergency floats (Luxury variant only) with manual and automatic deployment options
• Functional rockets and guns (Military variant only) with explosion effects
• Configurable Wire Strike Protection System, Skid Settling Preventers
• Choose to fly with doors installed or removed
• Each variant includes four (4) stunning liveries in 4K quality
• Hundreds of free liveries available for download on flightsim.to
• Paint kit available

Advanced Avionics & Detailed Systems:

• High quality Airbus Helionix avionics – the most modern and safe avionics suite
• First Limit Indicator containing TRQ, N1 and TOT limits combined in an intuitive pilot display
• Realistic normal procedures (checklists) included
• Synthetic Vision System on all 3 MFDs is supported without restriction
• Map display options including the ability to use any OpenStreetMap/slippy tile provider you may choose
• Maps are combined with sim flight plan, OSM underlay, and weather or HTAWS (Height Above Terrain) overlay
• Maps operate in light or dark mode
• Fully functional weather radar with configurable external radome
• Online weather service available on the tablet and DMAP system
• Included Tablet with powerful apps including Navigraph charts, LittleNavMap moving map, Neofly, Documents library, Maps, utilities & games
• Stream video and websites with our exclusive EFBConnect app for PC
• Integrated Garmin GTN750 (pms50) or the TDS GTNXi (TDS Sim Software)
• Add custom key bindings for over 350 cockpit actions (no extra software required)
• Home Cockpit friendly with L:Vars and H:Events for almost all functionality
• Great for both IFR and VFR flight

Powerful 4-axis Autopilot:

• State of the art auto-flight control system with Stability Augmentation System (SAS)
• GTC: Ground trajectory command: Maintain longitudinal and lateral ground speed. So called “follow the boat” mode
• GTC.H: Ground trajectory command with hover: This is an automatic hover mode which will acquire a position and maintain it in crosswinds up to the aircraft limit of 30kt
• LOC/GS APP/V.APP: Traditional precision approach and GPS approach modes
• Fully capable of flying a hands-off ILS-to-minimums approach
• Automatic level-off when approaching the ground to avoid Controlled Flight into Terrain
• Beep Trim (traditional trim mode and AFCS mode)
• AFCS and SAS may also be disengaged for a more challenging flight regime

Helicopter Flight Model:

• Helicopter flight model featuring fundamental flight dynamics like Effective Translational Lift, Ground Effect and advanced flight dynamics such as Vortex Ring State
• H145 uses an advanced Stability Augmentation System (SAS) to stabilize the helicopter using computer controlled actuators
• Support for All-Engines-Operative, One-Engine-Inoperative or Autorotation flight condition
• Operate in both Realistic and Arcade modes – enjoy with a controller or higher end hardware

Immersive Sounds:

• Realistic turbine, rotor, cabin, alert and environmental sounds
• Authentic sounds recorded from real H145 aircraft
• Floats deployment, Weapon launch and impact
• Doors mixed with environment and exterior sounds when open or removed
• More than 60 custom sounds included

Rapidgator

Download

Rapidgator Master List
↳ These download links are suited for Rapidgator Premium members only

Rapidgator Premium

ModsFire

Download

ModsFire Master List
↳ Due to rate limits, do not download multiple files at the same time
guest

316 Comments
Newest
Oldest
Inline Feedbacks
View all comments